Canada

Lattice gauge theory is an indispensible tool for non-Abelian fields, such as those in quantum chromodynamics where lattice results have been of central importance for several decades. Recent studies suggest that quantum computers could extend the reach of lattice gauge theory in dramatic
ways, but the usefulness of quantum annealing hardware for lattice gauge theory has not yet been explored. In this work, we implement SU(2) pure gauge theory on a quantum annealer for lattices comprising a few plaquettes in a row with a periodic boundary condition. Numerical results are obtained from calculations on D-Wave Advantage hardware for eigenvalues, eigenvectors, vacuum expectation values, and time evolution. The success of this initial exploration indicates that the quantum annealer might become a useful hardware platform for some aspects of lattice gauge
theories.

CAP Virtual Congress 2021

SU(2) lattice gauge theory on a quantum annealer

qubits.

glueballs

d-wave

su(2)

quantum annealer

lattice gauge theory

quantum computing

The Institute of Physics and IOP Publishing, in partnership with the Chinese Physical Society (CPS) and the University of Science and Technology of China (USTC) are proud to have brought together the international quantum science community online for this inaugural conference.


Early career and leading researchers from universities, industry and government worldwide came together to share, learn and collaborate on the latest research and emerging areas of high interest across quantum science and technology. The broad themes covered by Quantum 2020 included:

Quantum communication;
Quantum computing and quantum simulation;
Quantum sensing, metrology and imaging;
Quantum information theory, software and algorithms;
Quantum foundations;
Quantum technology in industry.
The four-day event featured talks from world-renowned scientists, interactive poster sessions and two exciting panel discussions on the themes of Quantum Technology in Industry and Quantum Technology Programmes Around the World.


You will need to [register](https://www.iopconferences.org/iop/frontend/reg/tRegisterEmailNew.csp?pageID=978403&eventID=1552&tempPersonID=536224) to obtain a ticket. . If you have already registered you should have been sent an email from Underline (to the email address that you registered with) with the subject line ‘Welcome to Quantum 2020’. This email includes your ticket for the event. 

If you have a ticket and are experiencing problems in accessing the event, please contact us. 

Quantum 2020

The Institute of Physics and IOP Publishing, in partnership with the Chinese Physical Society (CPS) and the University of Science and Technology of China (USTC) are proud to have brought together the international quantum science community online for this inaugural conference.

Early career and leading researchers from universities, industry and government worldwide came together to share, learn and collaborate on the latest research and emerging areas of high interest across quantum science and technology. 

technical paper

**WELCOME TO THE 2021 CAP VIRTUAL CONGRESS UNDERLINE PLATFORM**

The CAP staff and our organizing and program committees are pleased to welcome you to our 2021 Congress filled with plenary talks, technical sessions/talks, student presentations and competition sessions, workshops, and several symposia offered by the CAP divisions and its partners.  

You will also have opportunities to network with other delegates through the Gathertown platform accessed by selecting the lounge or posters button on the left.

Registered delegates should use the schedule button to call up the details of the session/event they wish to attend.  Each sessions includes a link to access the online platform where the event is taking place, either within Underline or through other Congress-related Zoom meetings.  

Invited speaker talks are identified with an (I), and student competitors include a (G*) or (U*) to identify graduate or undergraduate presenters.

Please take the time to check out the information about our sponsors and exhibitors, request further information, or leave a note of thanks for their support.

General information about the Congress can be found on the CAP website Congress pages at https://www.cap.ca/congress/2021.

Looking for a specific talk?   A full searchable list is available on our Indico Congress site at https://indico.cern.ch/event/985448/contributions/

We look forward to sharing this exciting week with you!


We combined information from Fluorescence Correlation Spectroscopy (FCS), Nuclear Magnetic Resonance (NMR), Small-Angle X-ray Scattering (SAXS) and Single-Molecule Förster Energy Transfer (smFRET) to calculate conformational ensembles for the neuronal transcription factor initiation protein 4E-BP2. This is a 120-residue intrinsically disordered protein which toggles between an active, non-phosphorylated (NP) state and an inactive multi-phosphorylated (5P) state. An initial pool of 4E-BP2 structures was generated using Trajectory Directed Ensemble Sampling (TraDES) (Feldman & Hogue, Proteins: Structure, Function, and Bioinformatics, 46, 8-23, 2002). The ENSEMBLE method (Krzeminski et al, Bioinformatics, 29, 398-399, 2013) was used to search and select conformations within the initial pool that are consistent with the experimental data. NMR and SAXS data were used as restraints for the conformational search and FCS and smFRET data were used as validation. 

The NP 4E-BP2 ensemble calculated with SAXS-only restraints showed a bimodal distribution of protein global dimensions such as the radius of gyration and the end-to-end distance. The back-calculated FRET efficiency and the hydrodynamic radius for this ensemble were lower than the respective experimental values. These inconsistencies are likely due to lack of short-range (5-20 Å) distance restraints, which are currently addressed by acquiring Paramagnetic Resonance Enhancement (PRE) data. Such data is available for the phosphorylated state (5P 4E-BP2), however this is partly folded, with a 4-stranded beta domain spanning residues 18-62. To address this challenge, we used the FastFloppyTail (FFT) program (Ferrie & Petersson, The Journal of Physical Chemistry B, 124, 5538-5548, 2020) to generate structures in the initial pool. As such, the folded region was modelled using the 5P 4E-BP2 folds from the Protein Databank, while the disordered tails were generated through the FFT algorithm. By incorporating the more realistic FFT-built prior in ENSEMBLE calculations, more accurate conformational ensembles of both phospho- and non-phospho- variants of 4E-BP2 were obtained. Analysis of these ensembles in terms of polymer physics and contact maps reveal new molecular level details lead to new insights into the biological function of 4E-BP2.

Protein Conformational Ensembles for a Disordered Protein Restricted by Separate Biophysical Experiments

Chemical warfare agents (CWAs) are potential threats to civil society and defence personnel. In recent years, many efforts has been deployed to develop a scalable, rapid and accurate detection system to identify trace amount of CWAs. Here we report a graphene-based field-effect transistor (GFET) sensor able to detect 800 ppb of dimethyl methyl phosphonate (DMMP), a simulant of the nerve agent sarin. We observe enhanced sensitivity when the GFET sensor is exposed to few mWs of UV light. Back gate measurements performed before and during exposures to the analyte allow us to investigate the sensing mechanism while monitoring the induced changes in carrier concentration and mobility in graphene.

Development of graphene-based field-effect transistor (GFET) sensors for a simulant of chemical warfare agents

Cosmology presupposes that on scales of $10^{8}$ light years the universe is the same at every point and in every direction. This is observationally supported by the cosmic microwave background (CMB) which has a temperature of 2.7 Kelvin in all directions. However, there exist small perturbations on this symmetric background - for example the CMB has perturbations of 0.001 Kelvin. A study of these fluctuations is cosmological perturbation theory. In this talk, I will review the standard theory of cosmological perturbations, explain our framework which is different from the standard method and then generalize our framework to include a matter clock.

Cosmological perturbation theory with matter time.

As a result of the growing world-wide antibiotic resistance crisis, many currently existing antibiotics have been shown to be ineffective due to bacteria developing resistive mechanisms. There are a limited variety of potent antibiotics that are successful at suppressing microbial growth, such as polymyxin B, however, are deemed as a last resort due to their high toxicity. Adverse side effects associated with polymyxin B treatment include nephrotoxicity, neurotoxicity, and hypersensitivity. Previous research has focused on the development of an effective drug delivery system that can inhibit bacterial growth while minimizing negative side effects. In particular, nanoparticles have been of interest as they can be conjugated to a drug of interest, allowing for effective drug transport to the target. Despite their potential, an antibiotic delivery system has yet to be established, due to the nanoparticles lacking specificity and lack of biocompatibility and rejection. Here, we present a novel antimicrobial drug delivery method that uses modified red blood cells (RBC) that are encapsulated around polymyxin B. These RBC-based antibiotics are made specific to certain bacteria through the addition of the corresponding antibodies to their cell membranes. We investigate whether this drug delivery system is effective at inhibiting bacterial growth and selective, which is important to minimize the negative side effects seen with conventional polymyxin B treatment. This RBC based platform is potentially advantageous to synthetic nanoparticle-based approaches because of their biocompatibility and bioavailability, resulting in longer retention time in the human body.

Novel drug delivery system for antibiotic therapy using modified erythrocyte liposomes

The solid polymer light-emitting electrochemical cell (PLEC) possesses a polymer homojunction that is reminiscent of a conventional p-n junction but also exhibits distinct features that are profoundly intriguing. The PLEC junction is formed under bias when the propagating p- and n-doping fronts in the semiconducting polymer make contact. The PLEC junction can be immobilized by cooling after the initial junction formation. Once the junction is fixed by cooling, the “frozen-junction” PLEC exhibits a unipolar electroluminescence (EL) and photovoltaic response. Further, the resulting frozen junction can be relaxed, or partially de-doped into a p-i-n junction by controlled manipulation of ion motion. The as-frozen p-n junction can be relaxed with repeated thermal cycles. More precisely, the de-doping was carried out in a single heating/cooling cycle during which a constant reverse bias (RB) current was applied to monitor the extent of de-doping and the magnitude of RB EL. It is on a frozen polymer p-i-n junction that the most puzzling electroluminescent phenomenon was observed. A model is developed that explains the reverse bias EL as caused by the tunnel injection of electrons and holes from bandgap states into a de-doped “intrinsic” region between the p- and n-doped regions. Moreover, the RB EL exhibits hypersensitivity to temperature when the de-doped cell was cooled. There is currently no explanation to this drastic EL enhancement by cooling. Several possible causes have been ruled out through a series of control experiments.

Temperature Sensitive Electroluminescence Observed in a Reverse Biased, Frozen Polymer P-I-N Junction

Recently, there has been considerable interest to study the nonlinear properties of ensembles of
metallic nanoparticles and quantum dots [1,2]. Nonlinear optical properties can be used for
processing the information content of data images, on which the research can potentially induce a
revolution in electronic as well as photonic nanotechnology and nanomedicine. We have studied
the energy transport due to the Kerr nonlinearity in plasmonic nanohybrids. The Kerr coefficient
has been calculated by using the quantum density matrix method in the dipole-dipole coupling
between quantum dots. Induced dipoles are created when the probe photon falls on the metallic
nanoparticles. These metallic nanoparticles interact with each other via dipole-dipole interaction.
We showed that the power is transferred from the metallic nanoparticles to the quantum dots
through surface plasmon polaritons. During this process, enhancement in the energy transfer in the
quantum dots is found. We have also predicted that the power spectrum peak would split into two
peaks due to the strong coupling between excitons and the dipole-dipole interaction. Considering
one peak as ON position and two peaks as OFF position, the present findings can be applied to
fabricate nanoswitches. The Kerr nonlinear plasmonics in metallic nanohybrids can also be used
for medical applications since there will be no damaging effect on the body.
[1] J Guo, K Black, J Hu, M Singh, Journal of Physics: Condensed Matter 30 (18), 185301 (2018).
[2] M.R. Singh; Phys. Rev. A102, 013708 (2020).

Kerr Nonlinearity and Energy Transport in Quantum Dots and Metallic Nanoparticles

Entropy stabilized oxides, containing a large number of different elements, exhibiting simple crystal structure have shown interesting properties such as colossal dielectric permittivity, superionic conductivity and enhanced exchange coupling.
To study how the ionic character can be tuned by using different mixtures of oxides, the effective charge for the rocksalt structure high entropy oxide (CuCoMgZnNi)O and medium entropy oxides including (CoMgZnNi)O, (CuMgZnNi)O, (CuCoZnNi)O, (CuCoMgNi)O were calculated by using Scott formula for effective charge and the data from infrared reflectance measurements. The data suggest that (CoMgZn Ni)O has the highest ionic character and the lowest ionic character belongs to (CuCoZnNi)O which has the the lowest effective charge.

Effective Charges in Entropy Stabilized Oxides

During the Covid-19 pandemic, face masks have become the new norm with their widespread use in public as part of a multi-barrier approach for infection control, including physical distancing, hand hygiene, and altered social behaviour. Masks provide benefits to both the mask wearer and to those in their proximity when they are worn by all individuals in a common area. The gold standard in personal protective equipment (PPE) remains the N95 respirator, made of synthetic materials with electrostatic properties that filter and retain more than 95% of aerosols <1 µm and larger in size. N95 respirators degrade during washing and disinfection, and as such are single use disposable PPE. Similarly, surgical-style masks made of polypropylene and non-woven materials are unsuited to frequent washing/decontamination with heat or detergents. Owing to their disposable nature, most commercially available PPE such as the above are unsustainable for supplying the public due to supply interruptions, high cost over time, and a lack of aesthetic attributes (colour, pattern) to encourage use.

As a result, textile manufacturers and a new cottage industry of homemade mask makers, including volunteers making donated masks for vulnerable populations, can provide fabric face masks to the public. Recently, the U.S. CDC indicated that commercial manufacturers of face masks will require testing although the conditions of such standards have yet to be outlined. Recently, Dr. Tam has made recommendations for mask materials to elevate the quality of masks being worn by the public, however these recommendations are not easily translatable to actual mask construction and such recommendations are based on very limited testing of fabric masks.

This presentation will discuss the development of a test apparatus for assessing mask efficacy by measuring the aerosols transmitted through the masks. We use a laser-based system, using relatively inexpensive diode lasers to illuminate the exhaled particles, a webcam for data acquisition, and Python-based particle tracking software. We make the approximation that the intensity of the scattered light from the droplets is proportional to the size of the droplet, but we will be able to quantify the droplet size by analyzing the data with Mie scattering theory.

Reference:
https://advances.sciencemag.org/content/6/36/eabd3083?te=1&nl=running&emc=edit_ru_20200822

Laser-based mask characterization for prophylaxis of Covid-19

Phytoglycogen occurs naturally in the form of compact, 42 nm diameter glucose-based nanoparticles in the kernels of sweet corn. Its highly branched, dendritic structure leads to interesting and useful properties that make the particles ideal as unique additives in personal care, nutrition and biomedical formulations. The properties of phytoglycogen nanoparticles can be altered through chemical modifications such as acid hydrolysis, which not only reduces their diameter but also alters their internal structure, producing significant changes to the interactions between particles in solution. As the acid hydrolyzed particles are packed beyond their glass transition volume fraction, the dependence of the zero-shear viscosity on the effective volume fraction abruptly changes from behaviour well-described by the Vogel-Fulcher-Tammann equation to more Arrhenius-like behaviour, with the transition marked by a pronounced kink in the data. This result is consistent with a reduction in stiffness for acid hydrolyzed phytoglycogen nanoparticles with a corresponding reduction in their fragility index.

Size and Stiffness Reduction of Phytoglycogen Nanoparticles Through Acid Hydrolysis

Time-domain terahertz (THz) spectroscopy has been widely exploited in studying semiconductors, superconductors, topological insulators, and metal-organic frameworks. A high-sensitivity THz system can resolve weak spectroscopic features and a broadband system allows experimentalists to rely on additional spectral information to investigate novel phenomena in materials. In a standard configuration relying on difference frequency mixing to generate and detect THz radiation, the spectroscopy signal can be improved by increasing the nonlinear interaction length inside a nonlinear crystal. However, the accessible spectral bandwidth is then limited by phase-matching conditions. Here we demonstrate a time-resolved THz system relying on noncollinear THz generation and detection schemes in thick nonlinear crystals to perform high-sensitivity and broadband spectroscopy. This concept relies on a phase grating etched on the front surface of two 2-mm thick gallium phosphide (GaP) crystals (THz generation and detection crystals) to diffract the incident near-infrared pulses. Our scheme exploits the long interaction length in these crystals to improve the signal strength and dynamic range in the system. In addition, the noncollinear geometry yields optimizable phase-matching conditions to access a broad spectral bandwidth. We compare our results with those obtained with a traditional broadband collinear system using a pair of thin GaP crystals without gratings. The noncollinear geometry shows a significant increase of the maximum signal amplitude, by a factor of 20, while also achieving a large spectral bandwidth reaching up to 7 THz. We also achieve a dynamic range above 80 dB between 1.1 and 4.3 THz. Our concept could be extended to other nonlinear crystals besides GaP to improve THz generation and detection in different spectral regions. In conclusion, this work paves the way towards high-sensitivity THz spectroscopy over a broad bandwidth in low power experiments and could enable high-field THz generation above 3 THz.

Premium content

SU(2) lattice gauge theory on a quantum annealer

Downloads

Next from CAP Virtual Congress 2021

Protein Conformational Ensembles for a Disordered Protein Restricted by Separate Biophysical Experiments

Similar lecture

Exploring hybrid quantum-classical neural networks for particle tracking