Czechia

Boobies have the habit of plunging into the sea at high speeds over 90 km/h to capture fish. Their head shape has changed over the history of evolution and this change may have benefitted boobies by the mitigation of impact on the plunge into the water. In this study, we focused on this possibility and investigated a head shape suitable for water plunging from the viewpoint of shock mitigation as well as the evolutional meanings of head shape change. In this research, booby’s head were modeled on the computer based on the CT scanned data of the scull of current and ancestral boobies and the models were printed by 3D printer to be used for the water plunging experiments. The fossil head of the ancestor was deformed during the fossilization process, so it was restored using modeling software. The completed model was plunged into the water surface at a speed of approximately 5.8 m/s, and the impact force was compared by measuring the acceleration at the time of water surface plunge. As a result, it was confirmed that the model based on the head of the present species had a smaller shock per unit volume and had an impact mitigation effect.

SEB Conference 2024

Relationship between Head Shape and Impact Mitigation in Plunge Diving Behavior of Boobies

EMNLP 2021 is planned to be a hybrid event in Punta Cana, Dominican Republic, with both on-site and fully virtual participation possible. The experience for on-site participants would closely approximate a normal pre-COVID *ACL conference, with 5-6 thematically organized parallel sessions and live Q/A and interactive discussion immediately after the talks. Presentations by virtual participants will be equitably interleaved with those of on-site participants, projected on the auditorium screens as if on-site, and also followed immediately by live Q/A and interactive discussion at a time during reasonable waking hours for the virtual presenter. For all participants, on-site and virtual, who are unable to attend a session due to either time-zone issues or because they are participating in another session live, talk recordings and slides will be available online at a minimum after the live presentation (and in many cases before as well), and questions may be submitted in advance on session-specific discussion boards and answered live in session with the usual visual aids if desired.

<iframe style="width:700px;height:400px" src="https://online.fliphtml5.com/ebtyf/ceby/"  seamless="seamless" scrolling="no" frameborder="0" allowtransparency="true" allowfullscreen="true" ></iframe>

Please Note: The EMNLP registration system is not currently connected to the underline site as we are still in the process of building out EMNLP 2021. You will receive access instructions from underline the week of November 1st. 

Access is given only to EMNLP upon registration, if you have not registered please do so [here](https://2021.emnlp.org/registration).

Registered attendees will receive access the week of November 1st.

EMNLP 2021

EMNLP 2021 is planned to be a hybrid event in Punta Cana, Dominican Republic, with both on-site and fully virtual participation possible.

poster

You need to log in with the email address you registered with. Access credentials have been sent to your email. 

Please be sure to check your spam and other email folders if you do not see an email confirmation right away.

Please log in to explore this event.

If you see this page it means you are not logged in or registered.

If you feel like you see this message by mistake please make sure you are logged in with the email you registered with.

If you are not registered yet, you can do so [**here**](https://www.sebiology.org/events/seb-conference-prague-2024/registration2024.html). 

Please login or register

SEB’s Annual Conference is celebrated for creating the perfect composition of research, new discoveries and collaborative connections. Be creative and innovative by exchanging ideas and knowledge with masters of biology from all over the world.

Different bird species exhibit substantial variation in flight behaviour. Flight behaviours are often associated with specific ecological niches and the unique demands that a given habitat or lifestyle imparts. One of the main ways in which niches differ is in how often a bird must use non-steady flight behaviours, such as take-off, landing, or manoeuvring. Due to the link between locomotion and morphology it follows that wing morphology should vary with the relative use of non-steady flight. We here investigated the wing morphology properties that underlay variation in flight behaviour by looking at how external and internal wing morphology relates to ecological parameters that vary in non-steady flight use. We focused on the radius and ulna for our analyses because many of the muscles that are essential for non-steady flight originate or insert on these bones. We hypothesized that the morphology of the radius and ulna varies among bird species in a pattern consistent with how often the species use non-steady flight as predicted by their ecology. We quantified variation in ulna and radius morphology using 3-dimensional geometric morphometrics and used phylogenetic comparative methods to uncover relationships among skeletal morphology, wing shape, and a suite of ecological variables that are linked to non-steady flight use. Our findings suggest that overall curvature and stoutness are major axes of variation for both radius and ulna shape. Furthermore, this morphological variation is potentially related to ecology and non-steady flight use.

Morphological variation of the radius and ulna among raptor (Accipitriformes) species in relation to ecology and unsteady flight behaviours

Fruit flies have been served as a great animal because of its rich genetics. In this research, we monitor weight changes and real-time activities of a fruit fly simultaneously using a force plate. The force plate has a large plate with a diameter of 35 mm which is over 11 times longer than its body length, and a spring structure consisting of four spirals. The force plate uses a glass wafer for preventing strain due to the passage of time, and four spiral cuts are simply fabricated by UV laser marker. The vertical displacement of the center plate is measured by a laser displacement meter fixed under the force plate and converted into the force. The resolution of the force plate is 0.1 µN, which is equivalent to 1/100 of the fruit fly’s weight. In the experiment, a fruit fly is placed in the center of the force plate, and a chamber is covered on top of it. The chamber prevents the force plate from vibrating due to airflow, making it possible to observe changes in fruit fly activity with high precision. Then, measurement is carried out until it stops moving. As it moves on the force plate multiple times, it can be observed that its weight gradually decreases over time. We have confirmed that its weight decreased by approximately 2.3% per hour. It is expected to lead to quantitative evaluation of water evaporation and metabolism from measuring its weight loss.

Long-term weight change measurement of fruit flies using a high-precision force plate

Spiders spin silk into different products, such as fibres, threads and sheets, tailored for specific
functionalities and to fulfil a variety of ecological roles. Examples include draglines and bridging
lines for structural support, as well as webs and sticky threads for prey capture. Most silk products
are made of a combination of different silk fibres with contrasting material properties. The most
common silk types are minor ampullate, major ampullate and aciniform gland silk. Spider silks
exhibit characteristic mechanical properties, including extensibility and tensile strength. How these
properties vary between spider species, gland origins and thread structures as poorly understood.
This study aimed to compare the mechanical properties of different silk products in Pholcidae, with
a particular focus on the cosmopolitan cellar spider (Pholcus phalangioides). P. phalangioides
constructs irregular three-dimensional webs comprising of unique mechanically interesting silk
products. This include capture threads called ‘gumfoots’ which are vertical sticky prey traps
designed to undergo spontaneous deformation and utilizes ‘draglines’ and airborne ‘bridging lines’
which serves for in locomotion and display distinct tensile strength and toughness to hold spider’s
weight. Each of these silk structures were hypothesized to show specific mechanical adaptations.
Preliminary results of tensile test show a significant variety in mechanical properties across
different silk types with varying extensibility, tensile strength and toughness. Further study will
focus on interspecific variation of the structural and mechanical properties of silk products
between pholcid species with different ecology and silk compositions and the composition of fibres
in Pholcidae.

Comparative Analysis of the Mechanical Properties of Silk Products in Pholcidae

Because granivorous birds need to exert bite forces to open seeds, evolution resulted in greater bite forces in species feeding on hard seeds. However, beaks also play a role in sound modulation during singing. They are especially important in song fragments with a high trill rate, which require fast open-close movements of the beak. Studies in canaries showed that females prefer songs with high trill rates, implying an important sexual selection pressure on beak speed in this species. In canaries, beak velocities and frequencies are approximately equal during feeding and singing. However, in finches with strong bite forces, like many Darwin’s finches, beak movements during singing are considerably slower than in canaries. Yet, there is no information about the difference in beak velocities and frequencies between feeding and singing in finches with strong beaks. Here we test the hypothesis that, also in species with a strong bite force, song performance is limited by the beak’s movement capacities. This is done using high-speed video recordings of the Java finch (Lonchura oryzivora) during both singing and feeding on seeds. Contrary to our hypothesis, significantly lower beak frequencies occurred during singing compared to during feeding. Although the beak generally rotates at higher amplitudes during singing, our results nevertheless indicate that Java finches are not producing their potential maximum trill rate. Such usage of the beak below its biomechanical potential in terms of speed and frequency during singing suggests different sexual selection pressures compared to species with considerably higher trill rates like canaries.

Need for speed: are beak speed and frequency similar during singing versus feeding in a strong-biting songbird?

Feeding ecology of carnivorous mammals is highly diverse. It is generally accepted, however, that most primarily employ one of three hunting strategies: pursuit predation, pounce/pursuit predation or ambush predation. Knowledge of how morphology and hunting type relate to each other is imperative for our understanding of the feeding ecology of extinct carnivores. 
Here, we offer a first insight into the relationship between trabecular structure in the distal humerus of carnivorous mammals and their respective hunting types. We analyse μCT-scans with the aim of uncovering morphological correlates to behavioural strategies. Our findings are then compared to results for the extinct thylacine (Thylacinus cynocephalus) to infer its likely hunting behaviour.
Results suggest habitual loading of the distal humerus related to hunting type. Higher values in degree of anisotropy (DA) are uncovered for ambush predators and lower values for pounce/pursuit and pursuit predators respectively. DA remains largely unaffected by phylogeny and body mass, pointing to a functional signal. 
Employing our methodology to the extinct thylacine reveals an overlap with extant pounce/pursuit predators, suggesting a pouncing behaviour.


Trabecular structure of the distal humerus in carnivorous mammals

Muscle is the prime mover of animal locomotion, but muscle force is not usually equal to output force. Instead, the instantaneous ratio between output and input force (the mechanical advantage, MA) is modulated by intervening skeletal elements. Traditional functional analysis, focussing on the instantaneous action of gearing, suggests that smaller MA favours speed, while larger MA favours force. However, mounting evidence suggests that this perspective is too simplistic when considering the outcome of a dynamic muscle contraction. We approach this problem systematically by introducing an analytical framework to study the effect of gearing. This framework reveals two mechanisms by which the output speed of a contraction is affected by gearing. First, gearing can limit muscle work output, because it is bound not only by muscle displacement, but also by muscle shortening velocity. Second, it controls how each unit of muscle work is partitioned into system energies (e.g. kinetic energy vs heat). Consequently, smaller gear ratios do not always result in larger output speeds. No single optimal gear ratio exists for any organism, but rather the optimum depends on internal muscle properties and contraction dynamics, as well as external forces. The analytical framework we propose provides a blueprint to determine optimality conditions across muscle physiology, anatomy, mechanical environment and size, and so to investigate form-function relationships in musculoskeletal gearing.

Musculoskeletal gearing for maximum speed: analytic optimization across mechanical environment and size.

Silicon (Si) is increasingly being recognised as an essential element for plant health to tackle abiotic stresses, and it may also deter herbivores from plant-feeding, as a result of tooth wear caused by silica phytoliths. However, direct quantitative evidence for Si-induced wear is scarce. In this study, we subjected pristine Atta vollenweideri ant mandibles to multiple wear treatments on Hordeum vulgare barley leaves, grown with either 0-, 2- or 4-mM Si-supplemented hydroponic media, resulting in varying Si concentrations in the leaves. Pristine mandibles were collected from freshly eclosed ants that had never engaged in foraging, and wear treatments were conducted by driving isolated mandibles through leaf lamina at a constant speed using custom-built clamps attached to a motor stage. To quantify the effects of mandible wear, before, in between, and after each treatment, the forces required to cut standardised PDMS sheets were measured using a custom-built fibre optic force transducer; after 300 mm barley cut length, the cutting forces on PDMS increased significantly across all Si conditions; this force increase, however, was not consistent across Si concentrations, such that the change in cutting force per leaf length cut was 174% larger on 4 mM compared to 0 mM leaves. These results indicate that mandible abrasion may be facilitated by the mechanical contact between cutting edge and silica phytoliths. As increased mandible wear is likely of significant detriment to lifetime foraging efficiency, targeted Si-supplementation may be an effective yet ‘green’ agricultural strategy to provide protection against insect herbivores.

Abrasive silica phytoliths significantly increase mandible wear in leaf-cutter ants

Birds fly within a moving atmosphere, but possess inertia relative to the Earth. As a bird is subjected to changes in the wind, its inertia acts as an anchor, holding it in place while the air washes past it, accelerating it relative to that air. Such wind variations (gradients), if exploited effectively, thus provide valuable opportunities for kinetic energy gain; a concept known as gradient soaring. Seabirds such as the albatross are famous for utilising this effect, exploiting wind gradients above ocean waves and in the atmospheric boundary layer to fly for thousands of miles with minimal energy expenditure. While gradient soaring has been most widely studied for these predictable and large-scale wind gradients, the same mechanisms permit energy gain from small, local and stochastic temporal variations in the wind. Urban environments in particular provide a rich landscape for atmospheric energy gain, where obstacles such as buildings and trees create complex flows with updrafts, wind shear and turbulence; previous research suggests that birds can almost half their energetic costs by utilising the wind in urban environments. Based on the dynamics of a gull-sized aircraft, flights through urban wind flow models have been simulated within an energy-aware path planning framework to elicit energy-gain manoeuvres and quantify the flight cost savings available. This work seeks both to explain the flight strategies of urban birds and to enhance the energy efficiency of small aerial robots.

Bird-Inspired Energy Gain Manoeuvre Discovery in Structured Urban Airflows

Anthropogenic carbon dioxide emissions have been increasing rapidly in recent years, driving pH and oxygen levels to record low concentrations in the oceans. Eastern boundary upwelling systems such as the California Current experience exacerbated ocean acidification and hypoxia (OAH) due to the physical and chemical properties of the transported deeper waters. Research efforts have significantly increased in recent years to investigate the deleterious effects of climate change on marine species, but have not focused on the impacts of simultaneous environmental stressors. Additionally, few have explored the physiological impacts of these environmental stressors on early life stages, which are more vulnerable and represent natural population bottlenecks in organismal life cycles. The physiological response of the red sea urchin (Mesocentrotus franciscanus) to co-occurring stressors was assessed by exposing larvae to varying OAH conditions observed along the California coast. Graded responses, proportional to treatment severity, indicate that minor shifts in OAH affect morphology and gene expression, especially related to growth and pH homeostasis. In addition to this gradient, breakpoints can be detected, representing drastic shifts in response curves and a potential environmental threshold below which growth and performance are profoundly impacted. The phenotypic and transcriptional breakpoints occurred between DO of 2.64-3.67 mg/L and pH 7.6-7.85 with an additional transcriptional breakpoint between DO 0.88-1.54 mg/L and pH 7.2-7.45. By assessing the physiological response and gene expression of these species, we can inform future management actions to mitigate OAH-related impacts and maintain fishery populations.

Transcriptional and Morphological Response of Red Sea Urchin Larvae (Mesocentrotus franciscanus) to Combined Ocean acidification and Hypoxia

In recent years, Nephrotic Syndrome (NS) has emerged as a significant challenge in global public health. NS encompasses a spectrum of diseases affecting kidney function, with Membranous Glomerulonephritis (MGN) being the most prevalent in mammals.Common indicators of NS include protein loss in urine and decreased blood albumin levels. Primary glomerulonephritis is the leading cause, with Anti-Phospholipase A2 receptor antibodies (anti-PLA2R) serving as a diagnostic marker for MGN, as per Kidney Disease: Improving Global Outcomes (KDIGO) guidelines.
Our study employed various machine learning techniques to develop predictive models using disease classification data and examination results such as complete blood count, blood and urine biochemistry. After data refinement, the dataset was split into training and testing sets, with Python utilized to build machine learning models. Statistical analysis revealed significant differences (p<0.05) in BUN, Creatinine, and eGFR between normal individuals and those predicted to have the disease. The machine learning process incorporated Synthetic Minority Oversampling Technique (SMOTE) to address imbalanced data and 5-Fold Cross-Validation for validation. Final models utilized the Random Forest algorithm and eXtreme Gradient Boosting (XG Boost), achieving an Accuracy and AUC of 0.83, indicating robust predictive performance.
Our methodology, leveraging routine blood and urine tests alongside machine learning algorithms, enables accurate prediction of MGN. In the future, this methodology holds promise for application in mouse research and potentially diagnosing human diseases in clinical.

Next from SEB Conference 2024

Morphological variation of the radius and ulna among raptor (Accipitriformes) species in relation to ecology and unsteady flight behaviours

Similar lecture

What's in Your Head? Emergent Behaviour in Multi-Task Transformer Models