Canada

Channel pruning is widely accepted to accelerate modern convolutional neural networks (CNNs). The resulting pruned model benefits from its immediate deployment on general-purpose software and hardware resources. However, its large pruning granularity, specifically at the unit of a convolution filter, often leads to undesirable accuracy drops due to the inflexibility of deciding how and where to introduce sparsity to the CNNs. In this paper, we propose REPrune, a novel channel pruning technique that emulates kernel pruning, fully exploiting the finer but structured granularity. REPrune identifies similar kernels within each channel using agglomerative clustering. Then, it selects filters that maximize the incorporation of kernel representatives while optimizing the maximum cluster coverage problem. By integrating with a simultaneous training-pruning paradigm, REPrune promotes efficient, progressive pruning throughout training CNNs, avoiding the conventional train-prune-finetune sequence. Experimental results highlight that REPrune performs better in computer vision tasks than existing methods, effectively achieving a balance between acceleration ratio and performance retention.

AAAI 2024

REPrune: Channel Pruning via Kernel Representative Selection | VIDEO

maximum coverage problem

neural network pruning

clustering

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines. AAAI-23 is the Thirty-Seventh AAAI Conference on Artificial Intelligence. The theme of this conference is to create collaborative bridges within and beyond AI. Like previous AAAI conferences, AAAI-23 will feature technical paper presentations, special tracks, invited speakers, workshops, tutorials, poster sessions, senior member presentations, competitions, and exhibit programs, and two new activities: a Bridge Program and a Lab Program. Many of these activities are tailored to the theme of bridges and all are selected according to the highest standards, with additional programs for students and young researchers. 
AAAI is providing you with a conference planner, which you can use to help organize your itinerary of activities. This includes talks to attend in person, talks to attend remotely, breaks with colleagues and your site seeing activities. To access this conference planner, please go to [https://aaai-2023.takemobi.io](https://aaai-2023.takemobi.io).

In order to access this site, you need to register. If you haven't already, please register [here](https://aaai.org/Conferences/AAAI-23/registration/).


AAAI 2023

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines.

technical paper

We are pleased to announce the Thirty-Eighth AAAI Conference on Artificial Intelligence (AAAI-24), which will be held in Vancouver, British Columbia at the Vancouver Convention Centre – West Building from 20-27 February, 2024.

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines. AAAI-24 will feature technical paper presentations, special tracks, invited speakers, workshops, tutorials, poster sessions, senior member presentations, competitions, and exhibit programs, and a range of other activities to be announced.

We expect for AAAI-24 to be an in-person conference – one author of all accepted papers will be expected to present work in person unless there are exceptional circumstances that prevent this.

In order to access the AAAI-24 event page you need to register [here](https://aaai.org/aaai-conference/registration/)

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines. 

Monocular 3D object detection usually adopts direct or hierarchical label supervision. Recently, the distillation supervision transfers the spatial knowledge from LiDAR- or stereo-based teacher networks to monocular detectors, but remaining the domain gap. To mitigate this issue and pursue adequate label manipulation, we exploit Foreground Depth map for feature-supervised monocular 3D object detection named FD3D, which develops the high-quality instructive intermediate features to conduct desirable auxiliary feature supervision with only the original image and annotation foreground object-wise depth map (AFOD) as input. Furthermore, we build up our instructive feature generation network to create instructive spatial features based on the sufficient correlation between image features and pre-processed AFOD, where AFOD provides the attention focus only on foreground objects to achieve clearer guidance in the detection task. Moreover, we apply the auxiliary feature supervision from the pixel and distribution level to achieve comprehensive spatial knowledge guidance. Extensive experiments demonstrate that our method achieves state-of-the-art performance on both the KITTI and nuScenes datasets, with no external data and no extra inference computational cost. We also conduct quantitative and qualitative studies to reveal the effectiveness of our designs.

FD3D: Exploiting Foreground Depth Map for Feature-Supervised Monocular 3D Object Detection | VIDEO

Deep implicit functions (DIFs) have emerged as a potent and articulate means of representing 3D shapes. However, methods modeling object categories or non-rigid entities have mainly focused on single-object scenarios. In this work, we propose MODIF, a multi-object deep implicit function that jointly learns the deformation fields and instance-specific latent codes for multiple objects at once. Our emphasis is on non-rigid, non-interpenetrating entities such as organs. To effectively capture the interrelation between these entities and ensure precise, collision-free representations, our approach facilitates signaling between category-specific fields to adequately rectify shapes. We also introduce novel inter-object supervision: an attraction-repulsion loss is formulated to refine contact regions between objects. Our approach is demonstrated on various medical benchmarks, involving modeling different groups of intricate anatomical entities. Experimental results illustrate that our model can proficiently learn the shape representation of each organ and their relations to others, to the point that shapes missing from unseen instances can be consistently recovered by our method. Finally, MODIF can also propagate semantic information throughout the population via accurate point correspondences

Implicit Modeling of Non-rigid Objects with Cross-Category Signals

Logical anomalies (LA) refer to data violating underlying logical constraints e.g., the quantity, arrangement, or composition of components within an image. Detecting accurately such anomalies requires models to reason about various component types through segmentation. However, curation of pixel-level annotations for semantic segmentation is both time-consuming and expensive. Although there are some prior few-shot or unsupervised co-part segmentation algorithms, they often fail on images with industrial object. These images have components with similar textures and shapes, and a precise differentiation proves challenging. In this study, we introduce a novel component segmentation model for LA detection that leverages a few labeled samples and unlabeled images sharing logical constraints. To ensure consistent segmentation across unlabeled images, we employ a histogram matching loss in conjunction with an entropy loss. As segmentation predictions play a crucial role, we propose to enhance both local and global sample validity detection by capturing key aspects from visual semantics via three memory banks: class histograms, component composition embeddings and patch-level representations. For effective LA detection, we propose an adaptive scaling strategy to standardize anomaly scores from different memory banks in inference. Extensive experiments on the public benchmark MVTec LOCO AD reveal our method achieves 98.1% AUROC in LA detection vs. 89.6% from competing methods.

Few Shot Part Segmentation Reveals Compositional Logic for Industrial Anomaly Detection | VIDEO

Large pre-trained vision-language models, such as CLIP, have shown remarkable generalization capabilities across various tasks when appropriate text prompts are provided. However, adapting these models to specific domains, like remote sensing images (RSIs), medical images, etc, remains unexplored and challenging. Existing prompt learning methods often lack domain-awareness or domain-transfer mechanisms, leading to suboptimal performance due to the misinterpretation of specific images in natural image patterns.  To tackle this dilemma, we proposed a Domain-Controlled Prompt Learning for the specific domains. Specifically, the large-scale specific domain foundation model (LSDM) is first introduced to provide essential specific domain knowledge. Using lightweight neural networks, we transfer this knowledge into domain biases, which control both the visual and language branches to obtain domain-adaptive prompts in a directly incorporating manner.  Simultaneously, to overcome the existing overfitting challenge, we propose a novel noisy-adding strategy, without extra trainable parameters, to help the model escape the suboptimal solution in a global domain oscillation manner. Experimental results show our method achieves state-of-the-art performance in specific domain image recognition datasets. Our code is available at https://github.com/caoql98/DCPL.

Domain-Controlled Prompt Learning

The widely used multiobjective optimizer NSGA-II was recently proven to have considerable difficulties in many-objective optimization. In contrast, experimental results in the literature show a good performance of the SMS-EMOA, which can be seen as a steady-state NSGA-II that uses the hypervolume contribution instead of the crowding distance as the second selection criterion. 

This paper conducts the first rigorous runtime analysis of the SMS-EMOA for many-objective optimization. To this aim, we first propose a many-objective counterpart, the m-objective mOJZJ problem, of the bi-objective OJZJ benchmark, which is the first many-objective multimodal benchmark used in a mathematical runtime analysis. We prove that SMS-EMOA computes the full Pareto front of this benchmark in an expected number of O(M^2 n^k) iterations, where n denotes the problem size (length of the bit-string representation), k the gap size (a difficulty parameter of the problem), and M=(2n/m-2k+3)^{m/2} the size of the Pareto front. This result together with the existing negative result on  the original NSGA-II shows that in principle, the general approach of the NSGA-II is suitable for many-objective optimization, but the crowding distance as tie-breaker has deficiencies.

We obtain three additional insights on the SMS-EMOA. Different from a recent result for the bi-objective OJZJ benchmark, the stochastic population update often does not help for mOJZJ. It results in a 1/Θ(\min{Mk^{1/2}/2^{k/2},1}) speed-up, which is Θ(1) for large m such as m>k. On the positive side, we prove that heavy-tailed mutation still results in a speed-up of order k^{0.5+k-\beta}. Finally, we conduct the first runtime analyses of the SMS-EMOA on the bi-objective OneMinMax and LOTZ benchmarks and show that it has a performance comparable to the GSEMO and the NSGA-II.

Runtime Analysis of the SMS-EMOA for Many-Objective Optimization

Continual learning (CL) has shown promising results and comparable performance to learning at once in a fully supervised manner. However, CL strategies typically require a large number of labeled samples, making their real-life deployment challenging. In this work, we focus on semi-supervised continual learning (SSCL), where the model progressively learns from partially labeled data with unknown categories. We provide a comprehensive analysis of SSCL and demonstrate that unreliable distributions of unlabeled data lead to unstable training and refinement of the progressing stages. This problem severely impacts the performance of SSCL. To address the limitations, we propose a novel approach called Dynamic Sub-Graph Distillation (DSGD) for semi-supervised continual learning, which leverages both semantic and structural information to achieve more stable knowledge distillation on unlabeled data and exhibit robustness against distribution bias. Firstly, we formalize a general model of structural distillation and design a dynamic graph construction for the continual learning progress. Next, we define a structure distillation vector and design a dynamic sub-graph distillation algorithm, which enables end-to-end training and adaptability to scale up tasks. The entire proposed method is adaptable to various CL methods and supervision settings. Finally, experiments conducted on three datasets CIFAR10, CIFAR100, and ImageNet-100, with varying supervision ratios, demonstrate the effectiveness of our proposed approach in mitigating the catastrophic forgetting problem in semi-supervised continual learning scenarios.

Dynamic Sub-graph Distillation for Robust Semi-supervised Continual Learning

Great progress has been made in learning-based object detection methods in the last decade. Two-stage detectors often have higher detection accuracy than one-stage detectors, due to the use of region of interest (RoI) feature extractors which extract transformation-invariant RoI features for different RoI proposals, making refinement of bounding boxes and prediction of object categories more robust and accurate. However, previous RoI feature extractors can only extract invariant features under limited transformations. In this paper, we propose a novel RoI feature extractor, termed Semantic RoI Align (SRA), which is capable of extracting invariant RoI features under a variety of transformations for two-stage detectors. Specifically, we propose a semantic attention module to adaptively determine different sampling areas by leveraging the global and local semantic relationship within the RoI. We also propose a Dynamic Feature Sampler which dynamically samples features based on the RoI aspect ratio to enhance the efficiency of SRA, and a new position embedding, i.e., Area Embedding, to provide more accurate position information for SRA through an improved sampling area representation. Experiments show that our model significantly outperforms baseline models with slight computational overhead. In addition, it shows excellent generalization ability and can be used to improve performance with various state-of-the-art backbones and detection methods. The code is available at https://github.com/cxjyxxme/SemanticRoIAlign.

Semantic-Aware Transformation-Invariant RoI Align

Cross-lingual cross-modal retrieval has garnered increasing attention recently, which aims to achieve the alignment between vision and target language (V-T) without using any annotated V-T data pairs. Current methods employ machine translation (MT) to construct pseudo-parallel data pairs,  which are then used to learn a multi-lingual and multi-modal embedding space that aligns visual and target-language representations. However, the large heterogeneous gap between vision and text, along with the noise present in target language translations, poses significant challenges in effectively aligning their representations. To address these challenges, we propose a general framework, Cross-Lingual to Cross-Modal (CL2CM), which improves the alignment between vision and target language using cross-lingual transfer. This approach allows us to fully leverage the merits of multi-lingual pre-trained models (e.g., mBERT) and the benefits of the same modality structure, i.e., smaller gap, to provide reliable and comprehensive semantic correspondence (knowledge) for the cross-modal network. We evaluate our proposed approach on two multilingual image-text datasets, Multi30K and MSCOCO, and one video-text dataset, VATEX. The results clearly demonstrate the effectiveness of our proposed method and its high potential for large-scale retrieval.

CL2CM: Improving Cross-Lingual Cross-Modal Retrieval via Cross-Lingual Knowledge Transfer

Adversarial attacks constitute a notable threat to machine learning systems, given their potential to induce erroneous predictions and classifications. However, within real-world contexts, the essential specifics of the deployed model are frequently treated as a black box, consequently mitigating the vulnerability to such attacks.
Thus, enhancing the transferability of the adversarial samples has become a crucial area of research, which heavily relies on selecting appropriate surrogate models.
To address this challenge, we propose a novel approach that generates adversarial attacks in a mutual-modality optimization scheme. Our approach is accomplished by leveraging the pre-trained CLIP model. Firstly, we conduct a visual attack on the clean image that causes semantic perturbations on the aligned embedding space with the other textual modality. 
Then, we apply the corresponding defense on the textual modality by updating the prompts, which forces the re-matching on the perturbed embedding space. 
Finally, to enhance the attack transferability, we utilize the iterative training strategy on the visual attack and the textual defense, where the two processes optimize from each other.
We evaluate our approach on several benchmark datasets and demonstrate that our mutual-modal attack strategy can effectively produce high-transferable attacks, which are stable regardless of the target networks. Our approach outperforms state-of-the-art attack methods and can be readily deployed as a plug-and-play solution.

Mutual-Modality Adversarial Attack with Semantic Perturbation

Self-supervised approaches for video have shown impressive results in video understanding tasks. However, unlike early works that leverage temporal self-supervision, current state-of-the-art methods primarily rely on tasks from the image domain (e.g., contrastive learning) that do not explicitly promote the learning of temporal features. We identify two factors that limit existing temporal self-supervision: 1) tasks are too simple, resulting in saturated training performance, and 2) we uncover shortcuts based on local appearance statistics that hinder the learning of high-level features. To address these issues, we propose 1) a more challenging reformulation of temporal self-supervision as frame-level (rather than clip-level) recognition tasks and 2) an effective augmentation strategy to mitigate shortcuts. Our model extends a representation of single video frames, pre-trained through contrastive learning, with a transformer that we train through temporal self-supervision. We demonstrate experimentally that our more challenging frame-level task formulations and the removal of shortcuts drastically improve the quality of features learned through temporal self-supervision. Our extensive experiments show state-of-the-art performance across 10 video understanding datasets, illustrating the generalization ability and robustness of our learned video representations.

Downloads

Next from AAAI 2024

FD3D: Exploiting Foreground Depth Map for Feature-Supervised Monocular 3D Object Detection | VIDEO

Similar lecture

Dynamic Structure Pruning for Compressing CNNs