United States

Arbitrary neural style transfer has been a popular research topic due to its rich application scenarios. Effective disentanglement of content and style is the critical factor for synthesizing an image with arbitrary style. The existing methods focus on disentangling feature representations of content and style in the spatial domain where the content and style components are innately entangled and difficult to be disentangled clearly. Therefore, these methods always suffer from low-quality results because of the sub-optimal disentanglement. To address such a challenge, this paper proposes the frequency mixer (FreMixer) module that disentangles and re-entangles the frequency spectrum of content and style components in the frequency domain. Since content and style components have different frequency-domain characteristics (\emph{e.g.} frequency bands and frequency patterns), the FreMixer could well disentangle these two components. Based on the FreMixer module, we design a novel Frequency Domain Disentanglement (FDD) framework for arbitrary neural style transfer. Qualitative and quantitative experiments verify that the proposed method can render better stylized results compared to the state-of-the-art methods.

AAAI 2023

Frequency Domain Disentanglement for Arbitrary Neural Style Transfer

low level vision

frequency domain

style transfer

deep learning

**Welcome to ACL-IJCNLP 2021!**

The great event is jointly organized by the Association for Computational Linguistics (ACL) and Asian Federation of Natural Language Processing (AFNLP). 

As in previous years, the program of the conference includes a poster session, tutorials, workshops and demonstrations in addition to the main conference.


We were able to keep the registration fees similar to those charged for the virtual ACL 2020. The one fee allows attendance at the main conference and any/all tutorials and workshops. These fees would be $125 Regular Early and $175 Regular Late; $50 Student Early and $75 Student Late. Early registration closes at midnight July 11, 2021 (Eastern Daylight Time).

**Reminder:** It is ACL’s policy that at least one author of each accepted paper (including ACL Finding papers) must register for the conference.

**Reminder2:** Underline site will open closer to the event. If you already registered you will receive access detail

Registration is now open

ACL-IJCNLP 2021

The great event is jointly organized by the Association for Computational Linguistics (ACL) and Asian Federation of Natural Language Processing (AFNLP).

poster

The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines. AAAI-23 is the Thirty-Seventh AAAI Conference on Artificial Intelligence. The theme of this conference is to create collaborative bridges within and beyond AI. Like previous AAAI conferences, AAAI-23 will feature technical paper presentations, special tracks, invited speakers, workshops, tutorials, poster sessions, senior member presentations, competitions, and exhibit programs, and two new activities: a Bridge Program and a Lab Program. Many of these activities are tailored to the theme of bridges and all are selected according to the highest standards, with additional programs for students and young researchers. 
AAAI is providing you with a conference planner, which you can use to help organize your itinerary of activities. This includes talks to attend in person, talks to attend remotely, breaks with colleagues and your site seeing activities. To access this conference planner, please go to [https://aaai-2023.takemobi.io](https://aaai-2023.takemobi.io).

In order to access this site, you need to register. If you haven't already, please register [here](https://aaai.org/Conferences/AAAI-23/registration/).


The purpose of the AAAI conference series is to promote research in Artificial Intelligence (AI) and foster scientific exchange between researchers, practitioners, scientists, students, and engineers across the entirety of AI and its affiliated disciplines.

Video object detection (VID) is challenging because of the high variation of object appearance as well as the diverse deterioration in some frames. On the positive side, the detection in a certain frame of a video, compared with that in a still image, can draw support from other frames. Hence, how to aggregate features across different frames is pivotal to the VID problem. Most of existing aggregation algorithms are customized for two-stage detectors. But, the detectors in this category are usually computationally expensive due to the two-stage nature. This work proposes a simple yet effective strategy to address the above concerns, which spends marginal overheads with significant gains in accuracy. Concretely, different from the traditional two-stage pipeline, we advocate putting the region-level selection after the one-stage detection to avoid processing massive low-quality candidates. Besides, a novel module is constructed to evaluate the relationship between a target frame and its reference ones, and guide the aggregation. Extensive experiments and ablation studies are conducted to verify the efficacy of our design, and reveal its superiority over other state-of-the-art VID approaches in both effectiveness and efficiency. Our YOLOX-based model can achieve promising performance (\emph{e.g.}, 87.5\% AP50 at over 30 FPS on the ImageNet VID dataset on a single 2080Ti GPU), making it attractive for large-scale or real-time applications. The implementation is simple, we have made the demo codes and models available at \url{https://github.com/YuHengsss/YOLOV}.

YOLOV: Making Still Image Object Detectors Great at Video Object Detection

Generative models for learning combinatorial structures have transformative impacts in many applications. However, existing approaches fail to offer efficient and accurate learning results. Because the learning objective is subject to combinatorial constraints, the gradient estimation of the objective is highly intractable. Existing gradient estimation methods would easily run into exponential time/memory space, or incur huge estimation errors due to improper approximation. For this, we develop NEural Lovasz Sampler (NELSON), a neural network based on Lovasz Local Lemma (LLL). We show it guarantees to generate samples satisfying combinatorial constraints from the distribution of the constrained Markov Random Fields model (MRF) under certain conditions. We further present a fully differentiable contrastive divergence-based learning framework on constrained MRF (NELSON-CD). Meanwhile, NELSON-CD being fully differentiable allows us to take advantage of the parallel computing power of GPUs, resulting in great efficiency. Experimental results on three real-world combinatorial problems reveal that NELSON learns to generate 100% valid structures. In comparison, baselines either time out on large-size data sets or fail to generate valid structures, whereas NELSON scales much better with problem size. In addition, NELSON outperforms baselines in various learning metrics, such as log-likelihood and MAP scores.

Learning Combinatorial Structures via Markov Random Fields with Sampling through Lovasz Local Lemma

Pretrained vision models for object recognition often suffer a dramatic performance drop with degradations unseen during training. In this work, we propose a RObust FEature Rectification module (ROFER) to improve the performance of pretrained models against degradations. Specifically, ROFER first estimates the type and intensity of the degradation that corrupts the image features. Then, it leverages a Fully Convolutional Network (FCN) to rectify the features from the degradation by pulling them back to clear features. ROFER is a general-purpose module that can address various degradations simultaneously, including blur, noise, and low contrast. Besides, it can be plugged into pretrained models seamlessly to rectify the degraded features without retraining the whole model. Furthermore, ROFER can be easily extended to address composite degradations by adopting a beam search algorithm to find the composition order. Evaluations on CIFAR-10 and Tiny-ImageNet demonstrate that the accuracy of ROFER is 5% higher than that of SOTA methods on different degradations. With respect to composite degradations, ROFER improves the accuracy of a pretrained CNN by 10% and 6% on CIFAR-10 and Tiny-ImageNet respectively.

Robust Feature Rectification of Pretrained Vision Models for Object Recognition

Stochastic human motion prediction aims to forecast multiple plausible future motions given a single pose sequence from the past. Most previous works focus on designing elaborate losses to improve the accuracy, while the diversity is typically characterized by randomly sampling a set of latent variables from the latent prior, which is then decoded into possible motions. This joint training of sampling and decoding, however, suffers from posterior collapse as the learned latent variables tend to be ignored by a strong decoder, leading to limited diversity. Alternatively, inspired by the diffusion process in nonequilibrium thermodynamics, we propose MotionDiff, a diffusion probabilistic model to treat the kinematics of human joints as heated particles, which will diffuse from original states to a noise distribution. This process not only offers a natural way to obtain the "whitened'' latents without any trainable parameters, but also introduces a new noise in each diffusion step, both of which facilitate more diverse motions. Human motion prediction is then regarded as the reverse diffusion process that converts the noise distribution into realistic future motions conditioned on the observed sequence. Specifically, MotionDiff consists of two parts: a spatial-temporal transformer-based diffusion network to generate diverse yet plausible motions, and a flexible refinement network to further enable geometric losses and align with the ground truth. Experimental results on two datasets demonstrate that our model yields the competitive performance in terms of both diversity and accuracy. 

Human Joint Kinematics Diffusion-Refinement for Stochastic Motion Prediction

Network binarization (i.e., binary neural networks, BNNs) can efficiently compress deep neural networks and accelerate model inference but cause severe accuracy degradation. Existing BNNs are mainly implemented based on the commonly used full-precision network backbones, and then the accuracy is improved with various techniques. However, there is a question of whether the full-precision network backbone is well adapted to BNNs. We start from the factors of the performance degradation of BNNs and analyze the problems of directly using full-precision network backbones for BNNs: for a given computational budget, the backbone of a BNN may need to be shallower and wider compared to the backbone of a full-precision network. With this in mind, Depth-Width Reshaping (DWR) is proposed to reshape the depth and width of existing full-precision network backbones and further optimize them by incorporating pruning techniques to better fit the BNNs. Extensive experiments demonstrate the analytical result and the effectiveness of the proposed method. Compared with the original backbones, the DWR backbones constructed by the proposed method result in close to $O(\sqrt s )$ decrease in activations, while achieving an absolute accuracy increase by up to 1.7\% with comparable computational cost. Besides, by using the DWR backbones, existing methods can achieve new state-of-the-art (SOTA) accuracy (e.g., 67.2\% on ImageNet with ResNet-18 as the original backbone). We hope this work provides a novel insight into the backbone design of BNNs. The code is available at https://github.com/pingxue-hfut/DWR.

Fast and Accurate Binary Neural Networks based on Depth-Width Reshaping

Depth map super-resolution (DSR) has been a fundamental task for 3D computer vision. While arbitrary scale DSR is a more realistic setting in this scenario, previous approaches predominantly suffer from the issue of inefficient real-numbered scale upsampling. To explicitly address this issue, we propose a novel continuous depth representation for DSR. The heart of this representation is our proposed Geometric Spatial Aggregator (GSA), which exploits a distance field modulated by arbitrarily upsampled target gridding, through which the geometric information is explicitly introduced into feature aggregation and target generation. Furthermore, bricking with GSA, we present a transformer-style backbone named GeoDSR, which possesses a principled way to construct the functional mapping between local coordinates and the high-resolution output results, empowering our model with the advantage of arbitrary shape transformation ready to help diverse zooming demand. Extensive experimental results on standard depth map benchmarks, e.g., NYU v2, have demonstrated that the proposed framework achieves significant restoration gain in arbitrary scale depth map super-resolution compared with the prior art. Our codes are available at https://github.com/nana01219/GeoDSR.

Learning Continuous Depth Representation via Geometric Spatial Aggregator

Crowdedness caused by overlapping among similar objects is a ubiquitous challenge in the field of 2D visual object detection. In this paper, we first underline two main effects of the crowdedness issue: 1) IoU-confidence correlation disturbances (ICD) and 2) confused de-duplication (CDD). Then we explore a pathway of cracking these nuts from the perspective of data augmentation. Primarily, a particular copy- paste scheme is proposed towards making crowded scenes. Based on this operation, we first design a "consensus learning" method to further resist the ICD problem and then find out the pasting process naturally reveals a pseudo "depth" of object in the scene, which can be potentially used for alleviating CDD dilemma. Both methods are derived from magical using of the copy-pasting without extra cost for hand-labeling. Experiments show that our approach can easily improve the state-of-the-art detector in typical crowded detection task by more than 2% without any bells and whistles. Moreover, this work can outperform existing data augmentation strategies in crowded scenario. 

Improving Crowded Object Detection via Copy-Paste

As a core technology of Intelligent Transportation System, traffic flow prediction has a wide range of applications. The fundamental challenge in traffic flow prediction is to effectively model the complex spatial-temporal dependencies in traffic data. Spatial-temporal Graph Neural Network (GNN) models have emerged as one of the most promising methods to solve this problem. However, GNN-based models have three major limitations for traffic prediction: i) Most methods model spatial dependencies in a static manner, which limits the ability to learn dynamic urban traffic patterns; ii) Most methods only consider short-range spatial information and are unable to capture long-range spatial dependencies; iii) These methods ignore the fact that the propagation of traffic conditions between locations has a time delay in traffic systems. To this end, we propose a novel Propagation Delay-aware dynamic long-range transFormer, namely PDFormer, for accurate traffic flow prediction. Specifically, we design a spatial self-attention module to capture the dynamic spatial dependencies. Then, two graph masking matrices are introduced to highlight spatial dependencies from short- and long-range views. Moreover, a traffic delay-aware feature transformation module is proposed to empower PDFormer with the capability of explicitly modeling the time delay of spatial information propagation. Extensive experimental results on six real-world public traffic datasets show that our method can not only achieve state-of-the-art performance but also exhibit competitive computational efficiency. Moreover, we visualize the learned spatial-temporal attention map to make our model highly interpretable. All datasets and codes are available.

PDFormer: Propagation Delay-aware Dynamic Long-range Transformer for Traffic Flow Prediction

We introduce AVCAffe, the first Audio-Visual dataset consisting of Cognitive load and Affect attributes. We record AVCAffe by simulating remote work scenarios over a video-conferencing platform, where subjects collaborate to complete a number of cognitively engaging tasks. AVCAffe is the largest originally collected (not collected from the Internet) affective dataset in English language. We recruit 106 participants from 18 different countries of origin, spanning an age range of 18 to 57 years old, with a balanced male-female ratio. AVCAffe comprises a total of 108 hours of video, equivalent to more than 58,000 clips along with task-based self-reported ground truth labels for arousal, valence, and cognitive load attributes such as mental demand, temporal demand, effort, and a few others. We believe AVCAffe would be a challenging benchmark for the deep learning research community given the inherent difficulty of classifying affect and cognitive load in particular. Moreover, our dataset fills an existing timely gap by facilitating the creation of learning systems for better self-management of remote work meetings, and further study of hypotheses regarding the impact of remote work on cognitive load and affective states. The dataset and the supplementary material are available on the website: https://pritamqu.github.io/AVCAffe.

AVCAffe: A Large Scale Audio-Visual Dataset of Cognitive Load and Affect for Remote Work

The popular Proximal Policy Optimization (PPO) algorithm approximates the solution in a clipped policy space. Does there exist better policies outside of this space? By using a novel surrogate objective that employs the sigmoid function (which provides an interesting way of exploration), we found that the answer is ``YES'', and the better policies are in fact located very far from the clipped space. We show that PPO is insufficient in ``off-policyness'',  Our algorithm explores in a much larger policy space than PPO, and it maximizes the Conservative Policy Iteration (CPI) objective better than PPO during training. To the best of our knowledge, all current PPO methods have the clipping operation and optimize in the clipped policy space. Our method is the first of this kind, which advances the understanding of CPI optimization and policy gradient methods.

Downloads

Next from AAAI 2023

YOLOV: Making Still Image Object Detectors Great at Video Object Detection

Similar lecture

Enhancing Content Preservation in Text Style Transfer Using Reverse Attention and Conditional Layer Normalization