United States

The experiments involving a slider moving on top of granular media consisting of photoelastic parti- cles in two dimensions have uncovered elaborate dynamics that may vary from continuous motion to crackling, periodic motion, and stick-slip type of behavior. We establish that there is a clear correlation between the slider dynamics and the response of the force network that spontaneously develop in the granular system. This correla- tion is established by application of the persistence homology that allows for formulation of objective measures for quantification of time-dependent force networks. We find that correlation between the slider dynamics and the force network properties is particularly strong in the dynamical regime characterized by well-defined stick-slip type of dynamics.

Powders &amp; Grains 2021

Correlating the force network evolution and dynamics in slider experiments

[EPJ Web of Conferences, Volume 249 (2021)](https://www.epj-conferences.org/articles/epjconf/abs/2021/03/contents/contents.html)

Follow us on [Twitter](https://twitter.com/g2021_p)

**Meet the Organizers**

<center>
<figure class="video_container">
	  <iframe src="https://screencast-o-matic.com/watch/cr130qV10B3?v=6&ff=1&title=0&controls=1" width=826 height=526  frameborder="0" allowfullscreen="true"> </iframe>
</figure>
	</center>


Welcome to the 2021 Powders and Grains conference. Please review the event's **Code of Conduct** [here](https://drive.google.com/file/d/1P_bOrjI2jSE55twRPVzWl5VkfARR-qBL/view?usp=sharing). 


**Powders & Grains 2021 Walkthrough Screencast**

This video will demonstrate how to navigate the conference and virtual platform -- and network with other attendees and speakers.


<center>
<figure class="video_container">
	  <iframe src="https://screencast-o-matic.com/watch/cr1vnKV1pgn?v=6&ff=1&title=0&controls=1" width=826 height=526  frameborder="0" allowfullscreen="true"> </iframe>
</figure>
	</center>

To register for the event, please follow the link below. 

Powders & Grains 2021

Powders & Grains 2021 will be held in Buenos Aires (Argentina, VIRTUAL) July 5, 13, 21, 29 and Aug 6, 2021. The aim of the conference is to give an up-to-date picture of the broad research field of granular media, powders and grains. Contributions from experts around the world will focus on research topics that cover a wide range of open problems in the field.

technical paper

Experiments on the discharge of a silo with an inclined outlet are performed using flattened seeds in order to evaluate the validity of a previous theoretical formulation developed in our work group [1]. In that description, funnel flow regime is assumed to be based on a free fall parabolic arc. The shape of this arc is described with a parameter which is the only one involved in the flow rate formulation. An experimental analysis of the behavior of this parameter is carried out based on the geometry and shape of the grains within the silo. Also, video analysis of the silo discharge is performed in order to investigate the velocity profiles at the outlet
of the hopper for these non-spherical particles. Experiments are contrasted with analytical predictions derived from the proposed formulation in order to assess and discuss its validity for the case of flattened particles.

Silo fischarge: influence of the particle shape on the velocity profiles

Through numerical simulations, we investigate impact generated seismic wave transmission in gran-ular media under extremely low pressure. This mimics the conditions in the interior of asteroids and other smallplanetary bodies. We find a dependency not only on the overburden pressure on the medium, but also on thevelocity of the impact that generates the wave. This is, at extremely low values of overburden pressure, the wavespeed depends no only on the imposed pressure, but also on the increment in pressure created by the passingof the wave. We study crystalline and random packings and find very similar behaviour though with differentwave speeds as expected. We then relate our results to different mission-related events on asteroids.

Seismic waves in the asteroid environment

In this work, we present an alternative methodology to solve the particle-fluid interaction in the
resolved CFDEM
R coupling framework. This numerical approach consists of coupling a Discrete Element
Method (DEM) with a Computational Fluid Dynamics (CFD) scheme, solving the motion of immersed particles
in a fluid phase. As a novelty, our approach explicitly accounts for the body force acting on the fluid phase when
computing the local momentum balance equations. Accordingly, we implement a fluid-particle interaction
computing the buoyant and drag forces as a function of local shear strain and pressure gradient. As a benchmark,
we study the Stokesian limit of a single particle. The validation is performed comparing our outcomes with the
ones provided by a previous resolved methodology and the analytical prediction. In general, we find that the
new implementation reproduces with very good accuracy the Stokesian dynamics. Complementarily, we study
the settling terminal velocity of a sphere under confined conditions.

Modeling particle-fluid interaction in a coupled CFD-DEM framework

In this work, we will use SedFOAM (sedFoam project, copyright © Cyrille Bonamy and contributors, 2015–2020; https://sedfoam.github.io) and FLOW-3D® (Version 12.0; 2019; https://www.flow3d.com; Flow Science, Inc.) to simulate a case scenario of a hydro-sedimentary canal proposed by Martino et al. in 2019. Benchmarking will be done based on the experimental study of Martino et al. (2019) on the development of a scour and mound formation due to a water jet in a confined canal. For a certain flow rate, a digging and refilling cycle of the sediments inside the scour is observed. The objective of this work is to be able to reproduce numerically the same cycle of digging and refilling and to be able to conclude the phenomena behind this type of sediment erosion cycle by comparing the experimental data with the numerical results.


Modelling of scour formation using SedFoam, continuum approach

We revisit the Critical State (CS) in a dynamic perspective at a mesoscopic scale to enrich the classical view of the critical state as a steady state. The dynamics of mesostructures has been characterized by recording generating and vanishing processes in discrete element simulations. Our results suggest that mesostructures have a short but regular lifespan at the critical state along a biaxial compression loading path.

Dynamic view of critical state regime in granular materials: a mesoscale perspective

We first phrase a boundary-value problem for a dense, steady, fully-developed, gravitational flow of identical inelastic spheres over in inclined bumpy base in the absence of sidewalls. We then obtain approximate analytical solutions for the profiles of the solid volume fraction, the strength of the velocity fluctuations, and the mean velocity of the flow. We compare these with those obtained in numerical solutions of the exact equations.

Analytical solutions for dense, inclined, granular flow over a rigid, bumpy base

We investigate numerically high speed granular flows down an incline and focus our attention on the influence of the restitution coefficient e of binary collisions on the nature of the flow regimes. We show in particular that e plays a major role in rapid flows. Decreasing e leads in general to denser flows but also quicker flows. The increase of the mean flow velocity with decreasing e is explained as the result of the clustering instability which produces a dense and cold core moving very fast as a plug.

Effect of dissipation in rapid-gravitational granular flows

Granular assemblies can experience complex failure patterns along a given loading path, with adistribution of ephemeral inertial events marked by local outbursts in kinetic energy. However, investigatingsuch mechanisms appears to be necessary to understand how a certain failure mode develops in a granularmaterial. Using a discrete element method, this study highlights several microstructure reorganizationsbefore the specimen reaches a proper failure state. Meso structures have proven to be efficient to understand the elementary mechanisms responsible for these outbursts in kinetic energy. Strain–like and stress-like quantities are thus defined at a mesoscale and they are used to characterize the nucleation and propagation of these local microstructural events.

Mesoscale inertial transition in granular materials

We have developed and employed a 3D particle stress tensor and contact force inference technique that employs synchrotron X-ray tomography and di↵raction with an optimization algorithm. We have used this technique to study stress and force heterogeneity, particle fracture mechanics, contact-level energy dissipation, and the origin of wave phenomena in 3D granular media for the past five years. Here, we review the technique, describe experimental and numerical sources of uncertainty, and use experimental data and discrete element method simulations to study the method’s accuracy. We find that inferred forces in the strong force network of a 3D granular material are accurately determined even in the presence of noisy stress measurements.

Stress and force measurement uncertainties in 3D granular materials

The macro-scale behavior of granular materials is strongly influenced by grain kinematics. The mobility of the grains in turn is affected by grain morphology which needs to be comprehensively characterized. Initially, morphological descriptors were determined by manual processes which were tedious and cumbersome. But with the help of image processing techniques and computational geometry, this problem can be handled with ease. The long-established descriptors such as sphericity and roundness can be estimated by operating over the grain boundary obtained from 2D images of the particle. The main objective of this study is to quantify these descriptors in a computationally effective way. The roundness quantification in previous studies involves the sequence of processes such as removing the noise, corner identification and fitting circles. This paper details the necessary modifications to the quantification process required to reduce the cost of time for a single particle. Further, the influence of different smoothing techniques and a new corner identification method will be detailed.

Correlating the force network evolution and dynamics in slider experiments

Downloads

Next from Powders & Grains 2021

Silo fischarge: influence of the particle shape on the velocity profiles

Similar lecture

The effect of boundary roughness on dense granular flows

Correlating the force network evolution and dynamics in slider experiments

.css-70qvj9{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}Downloads

Next from Powders & Grains 2021

Silo fischarge: influence of the particle shape on the velocity profiles

Similar lecture

The effect of boundary roughness on dense granular flows

Downloads